Acer Aspire Z1100 - WLAN Module Installation; WLAN Module Removal

Machine Maintenance Procedures 3-35
WLAN Module Removal 0
Prerequisite:
Mainboard Shielding Removal
1. Locate WLAN module (A) on mainboard. (Figure 3-32)
Figure 3-32. WLAN Module
2. Disconnect WLAN main (C) and auxiliary (E) antenna cables from WLAN module.
3. Remove screw (D) from module.
4. Disconnect WLAN module (A) from mainboard connector (B).
WLAN Module Installation 0
1. Connect WLAN module (A) into mainboard connector (B). (Figure 3-32)
2. Install and secure screw (D) to module.
3. Connect WLAN main (C) and auxiliary (E) antenna cables to WLAN module.
4. Install mainboard shielding.
ID Size Quantity Screw Type
D M2.0x4.0 1
B
A
C
D
E