Machine Maintenance Procedures 3-53
LCD Panel Installation 0
1. Connect LVDS cable (G) to panel connector (F). (Figure 3-50)
2. Install LVDS cable to adhesive on LCD panel.
3. Connect change board FFC (D) to panel connector (E).
4. Turn LCD over.
5. Install LCD panel from side (B) to middle frame, as shown in Figure 3-48.
6. Install and secure screws (A) to LCD panel. (Figure 3-47)
7. Install middle frame.
ID Size Quantity Screw Type
A M3.0x5.0 4
To Next Page
Loading...
