Acer Aspire Z1100 - HDD Bracket Installation; HDD Bracket Removal

Machine Maintenance Procedures 3-23
HDD Bracket Removal 0
Prerequisite:
HDD Module Removal
1. Disconnect HDD cable (B) from HDD module connector (C). (Figure 3-17)
Figure 3-17. HDD Module
2. Remove screws (A) from HDD module.
3. Remove HDD bracket (D) from HDD module.
HDD Bracket Installation 0
1. Install HDD bracket (D) to HDD module. (Figure 3-17)
2. Install and secure screws (A) to HDD module.
3. Connect HDD cable (B) to HDD module connector (C).
4. Install HDD module.
ID Size Quantity Screw Type
A M3.5x8.9 Ni 4
A
A
B
C
B
D