System Utilities 2-7
Power 0
Figure 2-3. BIOS Power
Table 2-3 describes the parameters shown in Figure 2-3.
BIOS Setup Utility
Main
Advanced
Power
Security
Boot Options Exit
Deep Power Off Mode [Enabled] Select the highest ACPI sleep
state the system will enter
when the SUSPEND button is
pressed.
Power On RTC Wakeup Support
[Disabled]
Power On by Onboard LAN
[Disabled]
Wake Up by USB KB/Mouse
[Enabled]
Restore On AC Power Loss
[Last State] Select Screen
Select Item
Enter: |Select
+/-: 11||Change Opt.
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
Version 2.10.1208. Copyright (C) 2002-2010, Acer Inc.
Table 2-3.
Parameter Description
Deep Power Off Mode Can enable or disable deep power off mode
Power On RTC Wakeup Support Can enable or disable power on RTC wakeup support
Power On by Onboard LAN Can enable or disable power on by onboard LAN
Wake Up by USB KB/Mouse Can enable or disable wake up by USB keyboard or mouse
Restore On AC Power Loss Can restore system to last state on AC power loss
To Next Page
Loading...
