Acer Aspire Z1100 - HDD Module Removal

Machine Maintenance Procedures 3-21
HDD Module Removal 0
Prerequisite:
Back cover Removal
1. Locate HDD module (A) on middle frame. (Figure 3-15)
Figure 3-15. HDD Module
2. Disconnect the following cables:
HDD cable (B) from mainboard connector (C)
HDD cable (D) from mainboard connector (E)
3. Remove screw (F) from middle frame.
4. Slide and remove HDD module from left side (G).
A
B
C
D
E
F
G