3-26 Machine Maintenance Procedures
ODD Module Installation 0
1. Install ODD bracket (K) to ODD module. (Figure 3-21)
2. Install and secure screws (J) from ODD bracket to ODD module.
3. Install ODD bezel (H) to ODD tray (F). (Figure 3-20)
4. Install and secure latch (G) to tray.
5. Install ODD tray (F) into ODD module.
6. Align and install ODD module (A) with guides (B) on middle frame. (Figure 3-18)
7. Install and secure screw (C) to lower cover.
8. Install lower logic door.
ID Size Quantity Screw Type
C M3.0x5.0 1
J M2.0x3.0 2
To Next Page
Loading...
