Acer Aspire Z1100 - Change Board Installation; Change Board Removal

Machine Maintenance Procedures 3-17
Change Board Removal 0
Prerequisite:
Back cover Removal
1. Locate change board (A) on middle frame. (Figure 3-11)
Figure 3-11. Change Board
2. Disconnect the following cables:
Change board FFC (C) from change board connector (B)
Change board FFC (D) from change board connector (E)
3. Remove converter board from adhesive on middle frame.
Change Board Installation 0
1. Install change board (A) to adhesive on middle frame. (Figure 3-11)
2. Connect the following cable:
Change board FFC (C) to change board connector (B)
Change board FFC (D) to change board connector (E)
3. Install back cover.
A
B
C
D
E