Acer Aspire Z1100 - Function Board Removal

3-14 Machine Maintenance Procedures
Function board Removal 0
Prerequisite:
Back cover Removal
NOTE:
NOTE:
Function board must be shipped with LCD panel for RMA.
1. Locate function board (A) on middle frame. (Figure 3-9)
Figure 3-9. Function board
2. Disconnect the following cables:
Right function board cable (C) from function board connector (B)
Left function board cable (D) from function board connector (E)
function board cable (G) from function board connector (H)
3. Remove screws (F) from middle frame.
4. Remove function board from middle frame.
A
C
D
G
H
E
B
F
F