Acer Aspire Z1100 - ODD Connector Installation; ODD Connector Removal

Machine Maintenance Procedures 3-39
ODD Connector Removal 0
Prerequisite:
Mainboard Shielding Removal
ODD Module Removal
Fan Module Removal
1. Locate ODD connector (A) on middle frame. (Figure 3-36)
Figure 3-36. ODD Connector
2. Disconnect ODD connector cable (C) from mainboard connector (D).
3. Remove ODD connector cable from guides (E) on middle frame.
4. Remove screws (B) from middle frame.
5. Remove ODD connector.
ODD Connector Installation 0
1. Install ODD connector (A) to middle frame. (Figure 3-36)
2. Install and secure screws (B) to middle frame.
3. Install ODD connector cable (C) to guides (E) on middle frame.
4. Connect ODD connector cable to mainboard connector (D).
5. Install mainboard shielding.
ID Size Quantity Screw Type
B M2.0x6.0 3
A
B
C
D
E