Acer Aspire Z1100 - DOS Flash Utility

2-16 System Utilities
DOS Flash Utility 0
Perform the following to use the DOS Flash Utility:
1. Press F2 during boot to enter Setup Menu.
2. Select Boot Options to modify boot priority order.
3. Move Removal Device to 1st Boot Device position (Figure 2-15). (Refer to Boot Options
menu)
Figure 2-15. Change BIOS Boot priority Order
4. Copy the BIOS file to USB HDD.
5. Insert the USB HDD and reboot computer to DOS mode.
6. Execute A to update BIOS.
NOTE:
NOTE:
During update, do not press any keys.
7. When flash is complete, system will restart automatically when finished.
BIOS Setup Utility
Main
Advanced
Power
Security
Boot Options Exit
Boot Priority Order Set Boot Priority
1st Boot Device
[Removable Device]
2nd Boot Device
[Hard Disk: ST31000..]
3rd Boot Device
[CD&DVD: HL-DT-ST..]
4th Boot Device [UEFI]
5th Boot Device
[LAN]
UEFI Boot Device Priority
Hard Disk Drive Priority
Optical Disk Drive Priority
Removal Device Priority
Network Device Priority
Quite Boot
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Enabled]
Select Screen
Select Item
Enter: |Select
+/-: 11||Change Opt.
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
Halt On
[All, but Keyboard]
Version 2.10.1208. Copyright (C) 2002-2010, Acer Inc.