3-36 Machine Maintenance Procedures
TV Tuner Module Removal 0
Prerequisite:
Mainboard Shielding Removal
1. Locate TV Tuner module (A) on mainboard. (Figure 3-33)
Figure 3-33. TV Tuner Module
2. Remove screw (B) from module.
3. Disconnect TV Tuner module (A) from mainboard connector (C).
TV Tuner Module Installation 0
1. Connect TV Tuner module (A) to mainboard connector (C). (Figure 3-33)
2. Install and secure screw (B) to module.
3. Install mainboard shielding.
ID Size Quantity Screw Type
B M2.0x4.0 1
To Next Page
Loading...
