Acer Aspire Z1100 - Infrared Board Removal

Machine Maintenance Procedures 3-19
Infrared Board Removal 0
Prerequisite:
Back cover Removal
1. Locate infrared board (A) on front bezel. (Figure 3-13)
Figure 3-13. Infrared Board
2. Disconnect infrared board cable (E) from board connector (D).
3. Remove screw (B) from front bezel.
4. Lift infrared board from guidepins (C) on front bezel.
5. Remove infrared board from front bezel in an angle, as shown in Figure 3-14
Figure 3-14. Infrared Board
A
B
E
C
D
C