Machine Maintenance Procedures 3-55
LED Board Removal 0
Prerequisite:
Middle Frame Removal
1. Locate left LED board (A). (Figure 3-52)
Figure 3-52. LED Boards
2. Move and hold latch (B) on LED board frame.
3. Remove left LED board module from guides.
4. Repeat steps 2 and 3 to remove right LED board module (C).
LED Board Installation 0
1. Align and install left LED board (A) with guides on LED board frame. (Figure 3-52)
2. Press on left LED board until secure under latch (B).
3. Repeat steps 1 and 2 to install right LED board (C).
4. Install LCD panel.
To Next Page
Loading...
