2-8 System Utilities
Security 0
The Security tab shows parameters that safeguard and protect the computer from
unauthorized use.
Figure 2-4. BIOS Security
Table 2-4 describes the parameters shown in Figure 2-4.
When prompted to enter password, three attempts are allowed before system halts.
Resetting BIOS password may require computer be returned to dealer.
BIOS Setup Utility
Main
Advanced
Power
Security
Boot Options Exit
Supervisor Password : Not Installed Valid Keys:
(1) a-z (A-Z)
(2)0~9
(3) 11 special keys: -+;,./
(4)key pad: 0-9 support and 5
special keys
User Password :
Not Installed
Change Supervisor Password
Select Screen
Select Item
Enter: |Select
+/-: 11||Change Opt.
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
Version 2.10.1208. Copyright (C) 2002-2010, Acer Inc.
Table 2-4. BIOS Security
Parameter Description
Supervisor Password Supervisor password status
User Password User password status
Change Supervisor Password Change status of supervisor password
To Next Page
Loading...
Need help?
General