Actidata actiNAS cube RDX - Configuration (Quick Setup)

107
System · / actiNAS Manager
Configuration (Quick Setup):
FTP Option
Port
Use this option to set the FTP port number. Default FTP port used by the NAS is 21.
Max. connection
Specify the maximum number of allowed connections. Default is 5.
Telnet Option
Port
Use this option to set the Telnet port number. Default Telnet port used by the NAS is 23.
Max. connection
Specify the maximum number of allowed connections. Default is 5.
SSH Option
Enable sftp
Use this option to enable or disable SFTP in SSH. SFTP (Secure FTP) provides
secure file transfer in SSH.