Actidata actiNAS cube RDX - Join NAS to NIS Domain

93
Network · / actiNAS Manager
Join NAS to NIS Domain
Steps to Join NAS in the NIS Domain:
1. Select Network ADS/NIS tab.
2. In NIS screen, check the Enable NIS Authentication option. Configure the necessary options.
o Enter the NIS Domain name.
o Enter the NIS Server IP address.
3. Click Save when done.
NIS Authentication Options
Enable NIS Authentication
Use this option to enable or disable NIS Domain Authentication.
NIS Domain
Enter the NIS domain name.
NIS Server
Enter the IP Address of NIS server.
Reset
Use this button to undo or clear any changes made.
Save
Use this button to save the changes made.
NOTE: When NAS is successfully joined to the NIS domain, the domain user accounts will appear in Account list.
NOTE: The NAS cannot be joined to the NIS domain if NASVG does not exist (NASVG is not yet initialized).