Introduction
14 Adept Cobra i600/i800 Robot User’s Guide, Rev G
• The robot system must not be used for purposes other than described in Section
1.6. Contact Adept if you are not sure of the suitability for your application.
• The user is responsible for providing safety barriers around the robot to prevent
anyone from accidentally coming into contact with the robot when it is in motion.
• Power to the robot and its power supply must be locked out and tagged out before
any maintenance is performed.
1.4 What to Do in an Emergency Situation
Press any E-Stop button (a red push-button on a yellow background/field) and then
follow the internal procedures of your company or organization for an emergency
situation. If a fire occurs, use CO
2
to extinguish the fire.
1.5 Additional Safety Information
Adept provides other sources for more safety information:
Manufacturer’s Declaration of Compliance (MDOC)
This lists all standards with which each robot complies. See “Manufacturer’s
Declaration” on page 15.
Adept Robot Safety Guide
The Adept Robot Safety Guide provides detailed information on safety for Adept robots.
It also gives resources for more information on relevant standards.
It ships with each robot manual, and is also available from the Adept Document Library.
See “Adept Document Library” on page 16.
1.6 Intended Use of the Robots
The Adept Cobra i600 and i800 robots are intended for use in parts assembly and material
handling for payloads less than 5.5 kg (12.1 lb).
To Next Page
Loading...
Need help?
General
