Adept Cobra i600/i800 Robot User’s Guide, Rev G 17
Robot Installation 2
2.1 Transport and Storage
This equipment must be shipped and stored in a temperature-controlled environment,
within the range –25° to +55° C (-13° to +131° F). The recommended humidity range is 5 to
90 percent, non-condensing. It should be shipped and stored in the Adept-supplied
packaging, which is designed to prevent damage from normal shock and vibration. You
should protect the package from excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport and store the packaged equipment
(see Figure 2-1).
The robot must always be stored and shipped in an upright position in a clean, dry area
that is free from condensation. Do not lay the crate on its side or any other non-upright
position: this could damage the robot.
The i600 robot weighs 41 kg (90 lb) and the i800 weighs 43 kg (95 lb) with no options
installed.
Figure 2-1. Cobra Robot on a Transportation Pallet
Eyebolt for lifting robot
after robot has been
unbolted from the
transportation pallet.
Place forklift or pallet-jack here.
To Next Page
Loading...
Need help?
General
