473
ADOBE ILLUSTRATOR CS2
User Guide
• Select Setup on the left side of the Print dialog box. Click a square or arrow on the Placement icon to specify the
origin point for aligning the artwork in relation to the page. Enter values for Origin X and Origin Y to fine-tune
the position of the artwork.
To move the printable area directly on the artboard, drag in the illustration window with the Page tool. As you drag,
the Page tool responds as if you were moving the printable area from its lower left corner. You can move the printable
area anywhere on the artboard; however, any part of a page that extends past the printable area boundary is not printed.
To print artwork on multiple pages
If you are printing artwork that cannot fit on a single page, you can tile the artwork onto multiple pages.
1 Choose File > Print.
2 Select Setup on the left side of the Print dialog box, and select a Tiling option.
Select Tile Full Pages to divide the artboard into as many whole pages as will fit (no partial pages are displayed or
printed). Select Tile Imageable Areas to divide the artboard into as many sections as necessary to print all the
artwork.
3 (Optional) If you selected Tile Full Pages, set the Overlap option to specify the amount of overlap between pages.
4 (Optional) Select General on the left side of the Print dialog box. Specify how many copies to print, how to collate
copies, and in which order to print the pages.
To print a range of pages, select Range. Then use numbers separated by a hyphen to indicate an adjacent range, or
use a comma to separate nonadjacent pages or ranges.
See also
“About page tiling” on page 37
To change the page size and orientation
1 Choose File > Print.
2 Select a page size from the Size menu. The available sizes are determined but the current printer and PPD file. If
the PPD file for the printer allows it, you can select Custom to specify a custom page size in the Width and Height
text boxes.
3 Click an Orientation button to set the page direction: Portrait Up to print in portrait orientation, right side
up; Landscape Left to print in landscape orientation, rotated to the left; Portrait Down to print in portrait
orientation, upside down; or Landscape Right to print in landscape orientation, rotated to the right.
4 (Optional) Select Transverse to rotate the printed artwork 90˚. To use this option, you must use a PPD that
supports transverse printing and custom page sizes.
See also
“About page size and orientation” on page 474
“About PPD files” on page 477
To Next Page
Loading...