ADS TRITON+ - Page 119

Configuration and Activation 4-17
5. Edit the parameters for the selected device as necessary, and
then click OK on the device dialog when complete.
6. Repeat steps 4 and 5 for each additional device in the Devices
box and then click Save to store the changes to your local
directory or network.
Refer to the following alphabetical device listing for more
information on editing devices:
Device:
See Page:
Advanced – Diagnostic
4-18
Advanced – Modem Setup
4-19
Advanced – Notification
4-21
Analog
4-22
Alarms
4-25
AV|Gated
4-27
Data Delivery
4-39
Flow
4-42
Flow Loss
4-43
Inclinometer
4-44
Long Range
4-46
AV|Max/Peak Combo
4-50
Sampler
4-62
ParaDepth/Smart Depth
4-64
ParaFlow/Surface Combo
4-69
Time Zone
4-83
XIO
4-84