ADS TRITON+ - Page 124

4-22 ADS TRITON+
®
Manual
z Check-in Sends a daily notification at the configured time
and is an optional configuration. This notification includes
battery voltage and current monitor status information. If
selected, select the check-in time from the Hour drop-down.
z Email Configure up to five (5) email addresses to receive the
notification.
SMTP Information This section contains the outgoing SMTP
server information for the wireless provider used by the monitor,
and email address from which the email notification will be sent.
Please contact ADS to obtain this information.
z SMTP Server Enter the name of the server through which
the monitor sends notification to the recipient(s).
z SMTP Username Enter user name for the server through
which the monitor sends notification to the recipient(s).
z SMTP Password Enter the password for the server through
which the monitor sends notification to the recipient(s).
z Email Address Enter designated email address for the
monitor. The default value of
TRITONPlus@administrators.com does not need to be
changed.
SMS Enter up to five (5) phone numbers for SMS text notification.
The default Start Hour and End Hour allow each Recipient to
receive all notifications, regardless of time of occurrence. To limit
the timeframe that notifications can be sent to certain phone
numbers, select the desired Start Hour and End Hour.
z Recipient 1 through 5 Enter the corresponding phone
number for each contact you want the monitor to notify when
one of the events included in the Event Strings section occurs.
Enter both the area code and the phone number for the cellular
phone (example: 2561234567).
Editing the Analog Device
Use the analog device for TRITON+ monitors to configure up to
eight 4-20mA analog channels in any combination of analog inputs
or analog outputs. Define incoming analog signals and store the