ADS TRITON+ - Page 126

4-24 ADS TRITON+
®
Manual
z MaxRegister Enter the maximum scaling values
corresponding to the external Modbus module. This value is
typically found in the customer’s external analog module’s
user guide.
z Entity (for analog outputs) Select the monitor data entity
whose value should be output (as analog signal) to an external
analog device.
z MinVariable Enter the value corresponding to the minimum
data value for the selected Entity for analog outputs or for the
minimum data value corresponding to an analog input. This
value is used for scaling the data value.
z MaxVariable Enter a value corresponding to the maximum
data value for the selected Entity for analog outputs or for the
maximum data value corresponding to an analog input. This
value is used for scaling the data value.
z Store (for analog inputs) Choose this checkbox to store the
corresponding analog input to the monitor memory.