In-6 ADS TRITON+ Manual
external power grounding kit, 6-
29, 6-34
ground connection facility, 6-22,
6-23, 6-29, 6-34
GSM/HSPA communication
modem
information, 1-13
H
handling the sensors, 11-21
hazardous conditions, 1-2
hydraulics, 2-15, 5-4
I
I/O, 2-36, 9-1
connecting 4-20 inputs, 9-3
connecting 4-20 outputs, 9-8
connecting analog inputs, 9-3
connecting analog outputs, 9-8
connecting digital inputs, 9-13
connecting digital outputs, 9-16
connecting relay outputs, 9-16
SCADA, 9-8
IECEx
certificates, 1-18
certification, 1-18
compliance, 1-18
hazardous area compliance, 1-18
standards
special conditions for use, 1-6
IMEI
uploading from the monitor, 11-4,
11-5
inclinometer, 1-4, 2-1, 2-10, 2-34
specifications, A-19
Inclinometer, 4-44, 8-1
ANGLE entity, 8-6
installation, 8-2
extension cable, 8-2
indirect communication, 3-23
inspection
monitor, 11-3
sensors, 11-20
installation
1/2-band mount
Peak Combo Sensor, 5-49
3/4-band mount
Peak Combo Sensor, 5-45
3/4-band mount with silt mount
adapter
Peak Combo Sensor, 5-47, 5-50
antenna, 3-20
ExPAC, 6-10, 6-18, 6-29
external DC power, 6-2
ground wires, 6-22, 6-29, 6-34
IS considerations, 1-6
manhole characteristics, 5-5
monitor, 7-1
manhole rim, 7-7
manhole wall, 7-4
rung, 7-3
mounting Peak Combo Sensor to
the ring, 5-24
mounting Peak Combo Sensor to
the ring using the silt mount
adapter, 5-24
mounting Surface Combo Sensor
to the ring, 5-32
mounting Ultrasonic Depth Sensor
to the ring, 5-32
overview, 5-1
ParaFlow Sensor
Topside Retrieval System,
5-80
Peak Combo Sensor
1/2-band mount, 5-49
3/4-band mount, 5-45
3/4-band mount with silt mount
adapter, 5-47, 5-50
silt mount adapter, 5-47, 5-50
pipe characteristics, 5-5
power supply, 6-7, 6-15, 6-18
ring, 5-28
sensors, 5-7, 5-59
mounting Peak Combo Sensor
to the ring assembly, 5-24
To Next Page
Loading...
