ADS TRITON+ - Page 523

Index In-7
mounting Peak Combo Sensor
to the ring assembly using
the silt mount adapter, 5-24
mounting Surface Combo
Sensor to the ring assembly,
5-32
mounting to the ring, 5-21
mounting Ultrasonic Depth
Sensor to the ring assembly,
5-32
ring assembly, 5-12
standard mount, 5-54
surcharge mount, 5-76
Topside Retrieval System,
5-80
SIM card,
3-16
site investigation, 5-4
special, 5-6, 5-38
1/2-band mount, 5-49
3/4-band mount, 5-45
3/4-band mount with silt mount
adapter, 5-47, 5-50
mounting the Peak Combo
Sensor, 5-44
parts and supplies, 5-39, 5-62,
5-81
tools, 5-43
standard, 5-5, 5-7, 5-59
mounting sensors to the ring, 5-
21
parts and supplies, 5-8
ring assembly, 5-12
tools, 5-11
supplying power to system, 6-36
Surface Combo Sensor
standard mount, 5-54
Topside Retrieval System, 5-2
Ultrasonic Depth Sensor
standard mount, 5-54
surcharge mount, 5-76
wireless antenna, 3-10
XBUS, 6-5, 6-29
XIO, 6-5, 6-29
installation types, 4-11
flume, 4-12
lookup, 4-12
pipe, 4-11
weir, 4-11
installing an inclinometer, 8-2
internal modem
replacing the SIM card, 11-24
internal power
12-volt IS battery pack, 1-5, 2-11
interval, 4-40
intrinsic safety (IS), 1-2
certified tools, 1-6
maintenance, 1-9
IP address
static and dynamic, 3-4
IS battery pack, 1-5, 2-11
IS certification
Peak Combo Sensor, 1-5
Surface Combo Sensor, 1-5
IS sensors, 2-15
L
Latitude, 4-14
LED window
monitor, 11-6
monitor activity codes, 11-6, C-1
leveling
Surface Combo Sensor, 5-33
Ultrasonic Depth Sensor, 5-33
location file (XML), 2-4
long range depth sensor
general, 2-1
Long Range Depth Sensor, 1-4
advanced parameters,
4-46
blanking,
4-47
capacitance,
4-48
editing long range device, 4-46
editing parameters,
4-46
extension, 5-71
gain control, 4-48
installation, 5-64, 5-72
Installation, 5-59
invert orientation, 5-66
manhole depth,
5-63