Hybrid Standalone NVR User Guide 3 Local Menu Operations
3.6.1.2 Date & Time Tab
This tab is for setting the system time.
Figure 3-53
Date Format
There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
Time Format
There are two types: 24-hour mode or 12-hour mode.
Date Separator
There are three denotations to separate date: dot, beeline and solidus.
DST
This section is for setting DST time and date. Set start time and end time by setting corresponding
week setup. Then set start time and end time by setting the corresponding date setup.
NTP
You must install an SNTP server (such as Absolute Time Server) in your PC first. In Windows XP OS,
you can use command net start w32time to boot up the NTP service.
• Server. Input your PC address.
• Port. The NVR supports TCP transmission only. The port default value is 123.
• Interval. Minimum update value is 1, in minutes; maximum value is 65535
• Manual Update. Enables you to synchronize the time with the server manually.
NVR4200 Series User Guide
86
To Next Page
Loading...
Need help?
General