Hybrid Standalone NVR User Guide 3 Local Menu Operations
3.5.3 Manual Recording
This feature enables you to immediately begin recording. The manual record function overrides the
automatic recording settings. There are three ways for you to access the Manual Record screen.
• Right mouse-click and select Record
• Navigate to Setting > Storage > Record in the Main Menu
• In live viewing mode, click the Rec button on the front panel remote control
Figure 3-51
Select the ○ icon to enable the corresponding channel for the desired mode. Alternatively, click All to
set all channels to the desired mode.
There are two modes of operation:
• Main stream, in the upper half of the dialog
• Extra stream, in the lower half of the dialog
There are three statuses:
• Schedule
• Manual
• Stop
Schedule. The channel records for the period you have set up (Main Menu > Setting > Schedule)
Manual. The channel records immediately until you select Stop. Manual recording has highest
priority.
Stop. All channels stop recording.
NVR4200 Series User Guide
83
To Next Page
Loading...
Need help?
General