ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 3 Local Menu Operations
Note:
• The system cannot open screen again if the backup operation is in progress.
• The system refreshes the device each time you use this function and sets the current
directory as the root directory of the peripheral device.
• If you go to the configuration backup screen first and then insert the peripheral device, you
must click the Refresh button to see the newly added device.
3.6.8 Default
Click the Default button. The Default dialog box opens. Check the box for the corresponding item
that you want to restore to the default factory setup.
Figure 3-80
After completing the setup, click the OK button. The system reverts to the previous menu.
NVR4200 Series User Guide
107

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English