ADT NVR4200 Series User Manual

2 Getting Started
Figure 2-20
6. Set the Snapshot Period, as described in section 3.5.1.1 on page 78.
7. View the images in the Playback screen. See section 2.5 on page 10.
2.7.2 Activation Snapshot
The Activation (or Trigger) function triggers a snapshot when the corresponding detection event
occurs.
To set up an Activation / Trigger snapshot:
1. Open the Snapshot screen from the Main Menu (Setting > Remote > Encode > Snapshot).
NVR4200 Series User Guide
22

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English