ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 4 Web Service
4.7 Setup
This tab provides a location for setting parameters.
4.7.1 Remote Camera
4.7.1.1 Remote Device
Click Add Device to add a remote device. The following screen appears.
Figure 4-11
Device Search button
1. Click this button to search for an IP address. This includes the device IP address, port, device
name, manufacturer and type.
2. Click the item name to refresh the display order.
3. Click the IP address and the system displays the IP addresses from small to large.
4. Click the IP address again and the icon appears. The system displays IP addresses from large
to small. Click other items to view their information.
Add button
Click to connect to the selected device and add it to the Added Device list in the lower half of the
screen.
Note: The system cannot add a new device if the device you want to add has the same IP and
TCP port as another device in the list.
NVR4200 Series User Guide
136

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English