ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 3 Local Menu Operations
Figure 3-49
2. Select the channels into which you want to paste settings (channels 2 through 8 in the
figure).
3. To apply the current channel settings to all channels, click the All box. The record settings of
all channels become the same and the Copy button becomes hidden.
4. Click the OK button to save the current Copy settings. You are returned to the Record screen.
5. Click OK in the Record screen.
3.5.2 HDD Manager
The HDD Management section is used to view and edit settings for the hard disk drive. Click the HDD
Manage icon to open the HDD Manage screen.
Here you can view the current HDD type, status, capacity and record time:
• 0—HDD is working properly
• X—HDD error
1. Select a HDD and select the format from the dropdown list.
2. Click the Execute button.
3. Click OK button to complete the setup.
Note: The system must restart to activate the setup.
NVR4200 Series User Guide
81

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English