ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 4 Web Service
Preset
1. Select Preset from the dropdown list.
2. Turn the camera to the corresponding position and enter the pre-set value from 1-80.
3. Click the Add button to add the preset.
Tour
1. Select Tour from the dropdown list.
2. Enter the preset value, from 1-7.
3. Click the Add button. One preset is added to the tour.
4. Repeat the above procedures to add more presets in the tour.
5. Alternatively, click Del to remove one preset from the tour.
Pattern
1. Select Pattern from the dropdown list.
2. Enter the pattern value, from 1-5.
3. Start to begin PTZ movement, such as zoom, focus, iris, direction, etc.
4. Click the Add button to set one pattern.
NVR4200 Series User Guide
128

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English