Hybrid Standalone NVR User Guide 4 Web Service
4.7.1.3 Encode
Encode
Video compression settings are made in the Encode screen.
Figure 4-14
Refer to the following for detailed information. After making your selections, click Save.
Channel
Select a single channel number or All from the dropdown list.
Video Enable
Check the box to enable Sub Stream (lower bandwidth) video. This item is enabled by default.
Code Stream Type
This includes main stream and motion stream. Select different encode frame rates from different
recorded events. The system supports Active Control Frame function (ACF), which enables you to
record in different frame rates. For example, you can use a high frame rate to record important
events, record scheduled events at a lower frame rate and set different frame rates for motion
detection recording.
Compression
Main Stream video supports H.264. The Sub Stream supports H.264, MJPG.
Resolution
The system supports various resolutions. Make your selection from the dropdown list.
NVR4200 Series User Guide
140
To Next Page
Loading...
Need help?
General