Hybrid Standalone NVR User Guide 4 Web Service
Latch
Select the time in seconds that the system delays after the external alarm has ended before turning
off the alarm and the activated output. This feature sets a postponement period before another
external alarm can be activated. Value ranges from 10 to 300 seconds.
PTZ Activation
This enables you to set Pan/Tilt/Zoom movement when an alarm occurs.
To set PTZ Activation:
1. Check the box to enable the function.
2. Click the Setup button. The PTZ Activation dialog appears.
3. Make the desired selections for each channel.
4. Click Save.
Figure 4-44
Tour
When an alarm occurs, this feature presents an alternating display (much like a slideshow) of the
channel(s) you set to record.
Check the box to enable, and the click the buttons for the channels that you want included in the
tour. The selected channels are highlighted.
Figure 4-45
NVR4200 Series User Guide
164
To Next Page
Loading...
Need help?
General