Hybrid Standalone NVR User Guide 4 Web Service
Figure 4-57
Select Sunday to Saturday from the dropdown list. Be sure to check the box to the left of the period
to enable it. To set your own business day and non-business days, select work day or non-work day
from the drop down list, and then click the Setup button. For example, you can set Monday to Friday
as working days and Saturday and Sunday as non-working days. Click the Save button when
finished.
Record Channel
Select the proper channel to record when the alarm occurs. Make sure to also set alarm record in the
schedule screen and select Schedule Record on the Manual Record screen.
Delay
To avoid rerecording the same event, enter the number of seconds to wait after the event has ended
before a new recording can begin. This value ranges from 10s to 300s.
Alarm Out
Check the box to enable the external alarm when the event triggers. In the boxes to the immediate
right, enable which camera(s) will record when the event occurs.
Latch
Select the time in seconds that the system delays after the external alarm has ended before turning
off the alarm and the activated output. This feature sets a postponement period before another
external alarm can be activated. Value ranges from 10 to 300 seconds.
PTZ Activation
Select this feature to set Pan/Tilt/Zoom movement when an alarm occurs. Click the Setup button to
open the PTZ Activation screen for setting up the camera.
NVR4200 Series User Guide
176
To Next Page
Loading...
Need help?
General