ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 4 Web Service
Options
 Channel. Select the desired channel number. Select All if you want to set for all channels.
 Pre-record. The system can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.
 Redundancy. The system supports a redundancy backup function, which enables you to
back up a recorded file in two disks. Highlight Redundancy to activate this function.
 ANR. Enable to save video to the SD card of the network camera in case the network
connection fails. The value ranges from 0s—43200s. After the network connection has
resumed, the system can get the video from the SD card and there is no risk of record loss.
Buttons
Copy. Use this button to copy the current channel’s setup to other channels.
To copy one channel’s setup features to others:
1. After making all your selections in the Schedule page, click the Copy button. The channel
selection dialog appears. The current channel name is grayed out.
2. Select the channel(s) to which you want to paste the same setup as for the current channel.
3. Click the OK button.
Figure 4-71
Save. Click to save the changes you have made.
Refresh. Click to refresh the Web connection.
Default. Click to return settings on this page to their default values.
To use the Schedule feature:
1. Select the channel number you want to set up in the Channel dropdown menu.
2. Make selections from options above.
3. Click the Setup button for the desired day. In the resulting setup dialog are six 24-hour time
periods.
NVR4200 Series User Guide
187

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English