ADTECH9 Series CNC Maintenance Manual
- 138 -
operation.
First, complete the mechanical home operation, offset corresponding
pulse, and then set this point as mechanical home.
Note: This parameter is invalid during program home operation.
014 X axis Home Dir
Y axis Home Dir
Z axis Home Dir
A axis Home Dir
B axis Home Dir
C axis Home Dir
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 1, 1, 0, 0
Effective time : Instant
Note : Set the mechanical home direction of every processing axis
Positive
Negative
015 X axis home speed
Y axis home speed
Z axis home speed
A axes home speed
B axis home speed
C axis home speed
Range : 0~9999
Unit : mm/min
Authority : Operation admin or higher
Default : 1000
Effective time : Instant
Note : Set the home speed of every axis separately
To Next Page
Loading...
