Adtech CNC9640 - Digital Output Interface

ADTECH9 Series CNC Maintenance Manual
- 198 -
18 IN49 Standby input
19 IN50 Standby input
20 IN51 Standby input
21 IN52 Standby input
22 IN53 Standby input
23 IN54 Standby input
24 IN55 Standby input
25 INCOM5 Input common end (24v+, 12v+)
12.2.3. Digital output interface
The wiring of digital output interface is as follows:
J1---Jn are the relays. Please connect the fly-wheel diode on each relay by following the method provided in
figure below