Adtech CNC9640 - Page 152

ADTECH9 Series CNC Maintenance Manual
- 147 -
parameter matches.
032 X feature (Rotary 0 Linear 1)
Y feature (Rotary 0 Linear 1)
Z feature (Rotary 0 Linear 1)
A feature (Rotary 0 Linear 1)
B feature (Rotary 0, Linear 1)
C feature (Rotary 0, Linear 1)
Range : 0~1
Unit : None
Authority : Super Admin
Default : 1
Effective time : Instant
Note : Set axis features.
0: Rotary axis
1: Linear axis
The setting of this parameter and P2.027 axis will affect the setting of
P2.021 Please refer to the parameter description of P2.021 for details.
033 X Rolling Display Mode
Y Rolling Display Mode
Z Rolling Display Mode
A Rolling Display Mode
B Rolling Display Mode
C Rolling Display Mode
Range : 0~1
Unit : None
Authority : Super Admin
Default : 0
Effective time : Instant
Note : Set the coordinate display mode of the axis. This parameter is valid when
P2.062~P2.065 is set to 0 This parameter is valid when P2.062~P2.065 is
set to 0