Adtech CNC9650 Programming Manual

ADTECH9 Series CNC Programming Manual
4.12.8. M2207
M2207: Reset and automatic execution of macro program. If there is O2207…M3000% in the M_FUNC.NC,
the system will reset and execute the macro program automatically.
4.12.9. M2208
M2208: Execution of macro program before automatic zeroing of the system. If there is O2208…M3000% in
the M_FUNC.NC, the system will execute the macro program automatically before zeroing.
4.12.10. M2209
M2209: Execution of macro program after automatic zeroing of the system. If there is O2208…M3000% in
the M_FUNC.NC, the system will execute the macro program automatically after zeroing.
4.12.11. M2212
M2212: Execution of M Code after suspension
4.12.12. M2213
M2213: Restart andexecution of M Code after suspension
4.12.13. M2214
M2214: Execution of M Code before suspension
4.12.14. M2216
M2216: Custom M Code for moving Axis X manually
4.12.15. M2217
M2217: Custom M Code for moving Axis Y manually
4.12.16. M2218
M2218: Custom M Code for moving Axis Z manually
4.12.17. M2219
M2219: Custom M Code for moving Axis A manually
4.12.18. M2220
M2220: Custom M Code for moving Axis B manually
4.12.19. M2221
M2221: Custom M Code for moving Axis C manually
4.12.20. M2222
M2222: Execution of M Code before MDI is started for processing

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English