Adtech CNC9650 Programming Manual

ADTECH9 Series CNC Programming Manual
2.7 Machine coordinate positioning commands
2.7.1. G53
A command used to position each axis to the machine coordinate
Format: G53 X_(Y_ Z_ A_ B_ C_)
X(Y_ Z_ A_ B_ C_): Machine coordinate position.
Note: The speed uses the axis rapid traverse parameters.
2.7.2. G53.1
A command used to position the interpolation to machine coordinate
Format: G53.1 X_(Y_ Z_ A_ B_ C_) F_
X(Y_ Z_ A_ B_ C_): Machine coordinate position.
F: Interpolation positioning speed

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English