Adtech CNC9650 - Page 161

ADTECH9 Series CNC Programming Manual
M89 P8 L0 (spindle quasi-stop signal invalid)
G01 Z[#403+#404] F#405 (Z axis rises to a safe altitude)
#5223=#[409+#200] (set the tool setting value corresponding to
current tool number in the coordinate system, and realize the tool compensation
function of different lengths)
N100
M30
)%
Macro address description
#200 tool No. to be changed; #400 system maximum tool No.; can be customized
#4121 current system tool No.; #3000 macro program alarm address
#403 Z axis tool change reference point; #404 Z axis tool change safe altitude