Advantech Adam-4013 RTD User Manual

ADAM-4000 Series User Manual 100
$AAB Get Operating Status
Get the channel operating status
When bit value is 0, it means this
channel is in normal operating, when
bit value is 1, it means this channel is
opening wire
5-24
$AA3 CJC Status
Returns the value of the CJC sensor
for a specified analog input module
5-25
$AA9SNNNN
CJC Offset
Calibration
Calibrates the CJC sensor for offset
errors
5-26
@AACCCSDM-
TTTT
Set Memory
Configuration
Set the channel storage status,
standalone mode, data logger mode,
storage type and sampling interval for
the specified analog input data log-
ger.
5-37
@AAD
Read Memory
Configuration
Return the configuration parameters
for the specified analog input data
logger.
5-39
@AASO
Set Memory
Operation Mode
Start/stop the recording function of
the memory module.
5-40
@AAT
Read Memory
Operation Mode
Read the recording status of the
memory module.
5-41
@AAL Event Record Count
Read the number of stored event
records in the memory module.
5-42
@AAN
Standard Record
Count
Read the number of stored standard
records in the memory module.
5-43
@AARNNNN Read Record Content
Read the contents of the specified
record.
5-44
@AAACSDHHHH-
TEIIII
Set Alarm Limit
Set the high/low alarm settings for
the specified channel.
5-46
@AABC Read Alarm Limit
Read the high/low alarm settings
for the specified channel.
5-48
Table 4.13: ADAM-4018M Command Table

Advantech Adam-4013 RTD Specifications

General

Brand	Advantech
Model	Adam-4013 RTD
Category	Other
Language	English