Advantech Adam-4013 RTD User Manual

101 ADAM-4000 Series User Manual
Chapter 4 Command Set
Table 4.14: ADAM-4019+ Command Table
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration
Sets the address, input range, baud
rate, data format, checksum status,
and/or integration time for a specified
analog input module
5-4
$AA2 Configuration Status
Return the configuration parameters
for the specified analog input module
5-10
$AAF
Read Firmware
Version
Return the firmware version code
from the specified analog input mod-
ule
5-12
$AAM Read Module Name
Return the module name from the
specified analog input module
5-13
#AA
Read Analog Input
from all Channels
Return the input values from all chan-
nels of the specified analog input
module
5-14
#AAN
Read Analog Input
from Channel N
Return the input value from channels
number N of the specified analog
input module
5-16
$AA5VV
Enable/Disable
Channels for Multi-
plexing
Enable or disable the individual chan-
nels in an analog module
5-17
$AA6 Read Channel Status
Get the enable/disable status of all
channels in an analog module
5-18
$AAB Get Operating Status
Get the channel operating status
When bit value is 0, it means this
channel is in normal operating, when
bit value is 1, it means this channel is
opening wire
5-24
$AA3 CJC Status
Returns the value of the CJC sensor
for a specified analog input module
5-25
$AA9SNNNN
CJC Offset
Calibration
Calibrates the CJC sensor for offset
errors
5-26
$AA0Ci
Single Channel
Span Calibration
Calibrates a specified channel to cor-
rect for gain errors
5-27
$AA1Ci
Single Channel
Offset Calibration
Calibrates a specified channel to cor-
rect for offset errors
5-28
$AA7CiRrr
Single Channel
Range Configuration
Configure the input type and range of
the specified channel in an analog
input module
5-29
$AA8Ci
Read Single Chan-
nel Range Configura-
tion
Get the input type and range of the
specified channel in an analog input
module
5-30
$AAXnnnn
Set Communication
WDT
Set communication WDT cycle time
from 0000 ~ 9999 (unit: 0.1 second. if
value is 0000, the communication
WDT function will be disable)
5-31
$AAY
Get Communication
WDT setting
Read the cycle time setting of com-
munication WDT
5-32

Advantech Adam-4013 RTD Specifications

General

Brand	Advantech
Model	Adam-4013 RTD
Category	Other
Language	English