Advantech AIMB-584 - Jumpers and Connectors

AIMB-584 User Manual 4
 Power consumption:
LAG1150 Core i7 4770S 3.1 GHz, 8MB L3 Cache, 4pcs 8GB DDR3 1600MHz
memory
+5 V 3.3 V 12 V 5 Vsb -12 V
2.22 A 1.13 A 5.18 A 0.49 A 0 A
Measure the maximum current value which system under maximum load (CPU:
Top speed, RAM & Graphic: Full loading)
 Board size: 240 mm x 240 mm (9.6" x 9.6")
 Board weight: 0.365 kg
1.4 Jumpers and Connectors
Connectors on the AIMB-584 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label Function
JFP1 (Keyboard
Lock and
Power LED)
Power LED
Suspend: Fast flash (ATX/ AT)
System Off: Slow flash (ATX)
System Off: OFF (AT)
System On: ON (ATX/ AT)
JFP2
Power Switch/ Reset/ External Speaker/ SATA HDD LED
/ SMBus connector
JSETCOM3 Serial port:RS232/RS422/RS485 jumper setting
JCMOS1 CMOS clear (default 1-2 pin)
JCASE1 case open connector
JLVDS1 LVDS power jumper
JIR1+JOBS1 +JWDT1 Jumper for Irda/Watchdog/OBS
JME1 Jumper for flash descriptor security Override
JTAG Joint Test Action Group connector 2x5 P
Table 1.2: Connectors
Label Function
COM1 Serial Port 1 (RS-232)
COM2 Serial Port COM2, pin header 2 x 5
COM3/4/5/6
Serial port: COM 3/4/5/6, box header 2x 20 p, COM3 sup-
ports RS232/422/485
DP1 Display Port Connector
VGA1+DVI1 VGA Connector (Top) and DVI connector (bottom)
LAN1_USB12 LAN1 & USB12 Connector
LAN2_USB34 LAN2 & USB34 Connector
LANLED1 Front Panel LAN Indicator connector
USB5-12
USB port 5-6, 7-8, 9-10, 11-12 (internal 2 x 5 pin header
on board)