Safety and Legal
This user’s guide provides operating instructions for testing ber optic networks with your FlexScan OTDR and assumes that you have basic
knowledge about testing ber optic networks. The purpose of this user’s guide is to explain how to use and maintain your FlexScan OTDR.
Please check our web site at www.AFLglobal.com, Test and Inspection for updates to this user’s guide and additional application information.
Warranty Terms and Conditions
AFL products are warranted against defective material and workmanship for a period of (1) one year from the date of delivery to the end user.
Any product that is found defective within the warranty period will, at the discretion of AFL, be repaired or replaced. Warranty will be voided
if the product has been repaired or altered by other than an authorized AFL product repair facility, if the void sticker has been compromised,
or which have been subject to misuse, negligence, or accident. In no case shall AFL liabilities exceed the original purchase price.
Safety Information
WARNING! Use of procedures or adjustments other than those specied herein may result in hazardous radiation exposure.
OTDR/OLS ports: 1550 nm; 1650 nm; 1310/1550 nm;
1310/1550/1625 nm; and 1310/1550/1650 nm
These are a CLASS I LASER output.
VFL port This is a CLASS II LASER output. Do not stare into beam!
NOTE! FlexScan OTDRs equipped with Bluetooth (option W1) contain one of the following two Bluetooth Transmitter Modules:
FCC ID: X3ZBTMOD FCC ID: X3ZBTMOD8
IC: 8828A-MOD7 IC: 8828A-MOD8
NOTE! FlexScan OTDRs equipped with Wi-Fi contain the following Wi-Fi Transmitter:
FCC ID: 2ANTH-FS2TS1
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by AFL Test and Inspection could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
IC: 23261-FS2TS1
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license
exempt (RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
3
To Next Page
