AFL FlexScan FS200 OTDR - Pairing FlexScan with FOCIS Flex Probe; Enable Bluetooth on FlexScan; Enable Bluetooth on FOCIS Flex

Home Screen
General Settings Screen Bluetooth Screen
Pairing FlexScan with FOCIS Flex Inspection Probe
To transfer ber-end images from the FOCIS Flex inspection probe and display inspection results on FlexScan, you must rst pair
your FOCIS Flex probe with FlexScan.
Enable Bluetooth on FlexScan
• From the Home screen, touch Settings .
• In the General Settings screen: If Bluetooth is disabled , touch its eld to display the Bluetooth screen.
• Touch the Bluetooth radio button to enable .
• In the device name eld you will see Bluetooth ID displayed for the FlexScan device.
Enable Bluetooth on FOCIS Flex
1. From FOCIS Flex Main Menu, select Settings, then press Select.
2. From the displayed Settings Menu, select Bluetooth, then press Select.
3. Highlight Pair with New Device, then press Select.
4. When a list of devices is displayed, navigate to and select Bluetooth ID of the FlexScan device, and then press Select to ‘Set as Default Device’.
6.1_PAIRING FlexScan
32
1
2
4
3
O verview
Settings
SmartAuto
Expert
Real-Time
OLS/OPM
Inspection
Results
Reports