AFL FlexScan FS200 OTDR - Configuring Pass;Fail Rule; View ITU G.671 or TIA-568.3-D Pass;Fail Rule Settings

Configuring Pass/Fail Rule
• ITU G.671 Pass/Fail Settings may be viewed but NOT changed.
• TIA-568.3-D Pass/Fail Settings may be viewed but NOT changed.
• User Pass/Fail Settings may be viewed and changed.
To view ITU G.671 or TIA-568.3-D Pass/Fail Rule Settings
• While in the SmartAuto Settings screen, make sure the ITU G.671 or TIA-568.3-D Rule is displayed in the Pass/Fail Rule eld.
• If not, touch the Pass/Fail Rule eld to display the Rules menu and touch the ITU G.671 or TIA-568.3-D option to select.
• When back in the SmartAuto Settings screen, touch and hold the displayed Rule to open one of the settings screen:
– Splice, Connector, or Splitter Pass/Fail thresholds will be displayed.
– Touch keys to toggle between screens.
– View settings.
– Touch to return to the SmartAuto Settings screen.
Note: FS200-60/300/303/304 include additional Pass/Fail screens to view/edit splitter min/max loss Pass/Fail limits based on split ratio.
3.2_PASS-FAIL
16
Splice Threshold
SmartAuto Settings
Rules menu Screen
Connector Threshold
O verview
Settings
SmartAuto
Expert
Real-Time
OLS/OPM
Inspection
Results
Reports