Stopping the System
To stop the system:
1. Stop the MUSICA Acquisition workstation.
The MUSICA Acquisition workstation can be stopped in two ways, either
by logging out of Windows or without logging out of Windows.
For detailed information, refer to the MUSICA Acquisition workstation
User Manual, document 4420.
2. Press the Power OFF button on the X-ray generator mini console to switch
off the generator.
3. Power off the DR detector:
• turn off the DR detector.
• remove the battery pack.
Note: If the DR detector is powered down, a warming-up may be
required on the next start-up.
100 | Valory (system with floor mounted column) | Basic Workflow
0426A EN 20220804 1858
To Next Page
Loading...
