AGFA Valory - Bucky

Bucky
The bucky is installed in the radiographic table and in the radiographic wall
stand.
The bucky clamps the detector during exposure and centers it relative to the
Automatic Exposure Control (AEC) and the grid.
The bucky supports DR detectors of 14x17 inch (43x35 cm) and of 17x17 inch
(43x43 cm).
1
4
2
2
3
5
6
1.
Bucky drawer
2.
Clamps
3.
Lock lever
4.
Bucky drawer handle
5.
Anti-scatter grid handle
6.
Center mark
Figure 79: Bucky in the radiographic table
148 | Valory (system with floor mounted column) | Bucky
0426A EN 20220804 1858