AGFA Valory - Cables, Transducers and Accessories

Cables, transducers and accessories
Cables, transducers and accessories which were tested and found to comply
with the collateral standard IEC60601-1-2 (EMC):
CAUTION:
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and
result in improper operation.
Unless noted otherwise, available cable lengths are 16 m, 20 m and 24 m.
Table to control box Type / connector / maxi-
mum length (m)
Remark
Foot pedal (optional) UL2464SB 6x AWG20 part of the switch
(Agfa service)
Main power cable VCTF Cable 1.5SQ*3C unschielded
Table to gen-
erator
Type / connector / maxi-
mum length (m)
Remark
AEC CAT5e/CAT6 SFTP 20 m
internal basic wiring (Agfa
service)
A611881
Control box to op-
erator room
Type / connector / maximum
length (m)
Remark
COM A 3 x AWG24 9p D-SUB BU/BU 20
m
basic wiring; at-
tention cross link
COM B Standard RS-232 cable (9 Pin D-
SUB) 20 m
basic wiring
LAN connection to
the system
CAT 5e SF/UTP or F/UTP 20 m basic wiring
210 | Valory (system with floor mounted column) | Product Information
0426A EN 20220804 1858